# How Fast Do Wind Turbines Spin? (20 RPM, on average)

What you need to know

Wind turbines’ RPM (Rotations Per Minute) speed is the number of complete rotations the blade makes in one minute.

The average wind turbine spins at a rate of 15-25 RPM.

That’s pretty impressive, considering the blades on these turbines can reach 107 meters long.

Some turbines have a maximum RPM of over 30, while others reach only 13 or 14 RPM. However, this number varies depending on the type of turbine and the wind conditions.

It’s important to note that rotation speed isn’t always constant throughout the day. There are times when it will slow down, for example, when there is no or little wind.

This article discusses the concept of tip speed, explains how wind turbines spin, and discusses the factors that affect their rotational speed.

## Tip speed

Tip speed is the velocity of the blade’s highest point. The higher the velocity, the faster the tip makes a full rotation around its axis. Therefore, it’s simply another way to measure RPM.

Tip speed is important because if it’s too low, most of the wind will pass through the gap between the blades, creating little to no lift force to help the rotor spin.

However, if the tip speed is too high, the blades will blur, acting as a solid wall to the wind, thus reducing the turbine’s efficiency. Further, exceeding the optimal tip speed produces significantly more noise pollution.

Optimal tip speed of a wind turbine depends on its size and design. Anything over the optimal tip speed can cause damage to the turbine and creates a lot of noise.

Here’s how to calculate the tip speed:

S = 2 x 𝝅 x r x RPM

Where

• S = Tip Speed
• 𝝅 = 3.14
• RPM = Rotations per minute

## How does RPM affect efficiency?

It’s not always better for RPM to be higher.

At higher RPMs, wind turbines produce more noise and vibration. This is harmful to people and animals in the turbine’s vicinity and can put a lot of stress on the turbine.

Additionally, higher RPM doesn’t necessarily mean that the turbine is producing more energy.

It’s often better to have a turbine that spins slower but has longer blades to catch more wind. A turbine that spins too fast for its size will not be as efficient because it will put a greater load on the gearbox, reducing the turbine’s lifespan.

## How do wind turbines spin?

Wind turbine blades are designed with a concave shape on one side and a convex shape on the other.

This helps to create more drag in front of the blade than behind it.

This difference in pressure causes rotation when the wind hits them – much like an airplane wing will generate lift when air passes over it.

## What affects the speed of a wind turbine?

### 1. Wind speed

Wind speed is one of the most significant factors determining how fast a wind turbine will spin.

Higher winds create more lift and drag on the blades, which causes them to rotate faster.

Longer blades create more drag and generate more power than shorter blades. This is because there is more surface area for the wind to hit, which causes more lift and drag.

However, longer blades are also heavier, requiring stronger wind to rotate them at high speed.

Engineers must strike a balance between these two factors when designing wind turbines.

To make their turbines as efficient as possible, they design the blades to be very thin so that they can spin faster in lower winds.

### 3. Tower height

The height of a wind turbine affects how fast it spins. At higher altitudes, the wind is stronger, with less turbulence.

This means that the turbine can spin faster since it doesn’t have to fight as much wind resistance.

• Hi, I'm Nichole! 👋
I always felt close to nature during my childhood. Preferring to spend my time alone playing with backyard animals at my family farm. 🐷
In 1997, I attained my electrical engineering degree at the Oregon Institute Of Technology, graduating top of my class. Several years later, I qualified for my M.S. in Renewable Energy Engineering, also at OIT. 🎓

Combining my love for nature and passion for engineering, I have worked for solar panel manufacturer's in my state, most notably as a PV solar engineer for Zamp Solar.

I founded RenewableSystems to share my knowledge and expertise in the renewable energy field and help save this beautiful little planet of ours. ☀️🌎